FireGlass Fireplaces Gallery 1
Converting to FireGlass Provides a Clean Burn and More Heat Than Fake Logs
Mike Sherk filled his fireplace with lots of Starfire Base Glass and accented it with Roma Red Topper, Saffron Topper and Red Brown Toppers and Toppings
The Fireplace below was a combination of Bronze Rust Copper Base Glass with a sprinkling of Starfire Base Glass.
The following fireplace had been filled with pebbles, unfortunately this is not a wise option, as they start to pop when they get too hot. So after a few close calls we got a call and replaced the white stones with some Chunky Clear.

Ty Havas didn't want an ordinary Propane pan for his fireplace. He wanted a pan that would be more than functional. So after some sketches and discussions we began making a cardboard mock up.
He would ultimately receive a Stainless Steel pan with angled legs and a 2 inch depth. Here the cardboard mock-up along with his fireplace measurements (which you can see denoted on the cardboard piece below the mock-up) assure that we attain the correct size and appropriate design.
The fireplace is emptied out and it becomes apparent that its in dire need of a fresh coat of paint. And since the custom pan was built with legs, the fireplace floor will be left visible and as a result fresh tile will be added to the hearth.
The fireplace re-design is complete with two custom reflective sterling silver panels on either side of the pan to give the illusion of the fireplace being larger.
The stainless steel pan is filled 1/4" Bronze Base Glass, 1/4" Bronze Reflective Base Glass, Copper Ruby Red Topper, Yellowish Opal Orange Topper, and Red Brown Topper and a few Classic Diamonds.
A wonderful transformation.

Tucker from Texas re-did both fireplaces, the formal living room with 1/4" Starfire Base Glass, 1/2" Starfire Base Glass, Gold Base Glass and a few Diamonds.
And his Great room with Gold Base Glass and Amber Base Glass.
We Designed both fireplaces at the AMA (American Music Awards) Green Room. And along the way we met 2 of our famous fans Billy Idol and Nicolette Sheridan!
Cory Golliday redid his fireplace, follow along and see the complete transformation. Starting with the emptying of the fireplace and a fresh coat of fireplace paint.
Below you see the surrounding area prepped for the paint. Once done you can install the burner and light to help it dry quicker.
The FireGlass used was Starfire Base Glass, Pyrite Clear Base Glass, Crystal Toppers and Classic Diamonds.

This is Brian Pokrzywa's fireplace. He cleared it out and dry-cleaned with a steel brush. getting it ready for a fresh coat of high-heat fireplace paint. Thank you Brian for sending us your photos; helps all our customers better understand the easy self installation process.
Brian prepared the area around the fireplace, to assure no fireplace paint would get into any unwanted areas. He then sprayed the inside with a matte black paint.
He then laid a bed of regular playground sand from his local home department and placed his indoor fireplace burner above it before pouring Gray Base Glass and Pyrite Gray Base Glass FireGlass.

Our customers Michael and Linda Shimokaji sent us these photos of their fireplace as it was before. In the 1st photo on the left we see a combination of fake logs with some FireFlass. The whole thing was a mess though, a messy paint job, the wrong burner and burnt glass!
. |
 |
You'll notice that their original burner was a single pipe. So we definitely swapped it out for a double 18" Steel burner to assure a nice flame pattern.
Complete with Bronze Base Glass, Bronze Rust Copper Base Glass and a few subtle hints of Blue Toppers and Red Orange Toppers.

This fireplace was located in the Family room and again we ran into similar problems as those we found in the living room fireplace. So we went to work on rectifying the same issues.
Linda and Michael choose the same FireGlass colors for their family room fireplace as well.

Thanks to Jay Arthur for sending us his photos. Jay used Starfire Base Glass and 2 lbs of Gold Base Glass as a Topper. Great job Jay!
With 1/4" Clear Base Glass with 3/4" Clear Base Glass fire glass on top.
Here is another series of BEFORE & AFTER pictures of a corner fireplace install. And now for the results, here are 3 AFTER shots using 1/4" Gold Base Glass FireGlass crystals.
More Starfire Base Glass
This was a really unique outdoor job in Colorado using 3 ground cover effects. The glass fire pits are using Azurlite Base Glass and Gray Base Glass

These photos showcase how easy it is to install a glass and fire fireplace. The installation utilizes our 2" method which saves you 1/3 the cost of the glass! Don't be fooled by the antics of some installers. After the fireplace has been cleaned and is now ready for paint. We have installed the burner which is as easy as hooking up a garden hose. This is a little hard to see but we have 2" of crushed lava rock under the pan burner which is actually your new base. We now have pulled the burner to the top surface and covered the lava rock with sand to expose the burner. We then adjusted the flame pattern by turning the burners to obtain our flame direction.
Here is the finished custom fireplace design using Blue Green Reflective Base Glass. And who would know that there is a 2" base of filler underneath?

This photo comes to us from Jim Drewett in Pasadena, Ca. Here is a close up of the new burner pan before we install the fire glass. If you would like a custom burner please Call us at 909 527-4425 or Email info@ecofirefeatures.com for more dream making details! Here are the 2 pictures of our glass fire fireplace completed using the custom burner pan.

This modern fireplace design comes to us from Andre Silva in Red Hill. This particular fireplace burned natural gas; so it was designed without a burner pan. However, fireplaces that use propane will NEED a pan. These photos showcase Starfire Base Glass fire glass and we added one of our custom made aluminum Surround with a special frosted glass.
Here are 2 pictures of the same fireplace that reveal when it really comes to life - during the evening with the glow of the Fire Glass.
Here is an awesome picture from of a 14" x 21" burner pan. Installed by Bruce Dizigns. The burner pans we created to spread the flames all throughout the fireplace. Here is a picture of the pan on high flame, without any glass. Check out that fire power - lots of flame!
And now here is the pan covered with Starfire Base Glass Fire Glass

Another Step by Step installs of Fire and Glass Fireplaces.
Step 1 - Clean out your old fireplace with a steel brush. Step 2 - Paint the fireplace walls with high-heat paint otherwise known as stove paint.
Step 3 - Then add some beautiful glass fire like Starfire Base Glass topped with Bronze Base Glass

Here are some more fireplace installation. This is how it looked when we arrived. Then we installed our burner and tested the draft of the flame.
Then we poured some lava rock and pulled the burner to the top.
We then added some Ford Blue Base Glass with Ford Blue Reflective Base Glass FireGlass. And that's it! Light your new fire and glass fireplace and enjoy.
Here Are Some more Step by Step installs of Fire and Glass Fireplaces. This picture comes to us from Bill Anderton in Atlanta, Georgia. He used
1/4" Bronze Base Glass and
Clear Base Glass mix.
This Fireplace below in Upland, California installed by Bruce Dezigns, he used 2 lbs of each color (Multi Mix Base Glass), very colorful under fire and by daylight.
The 5 fireplace pictures below are on a 32" fireplace with our manifold/ pan below the surface. After the pan, it took only 35 lbs of Bronze Base Glass and 5 lbs of Starfire Base Glass as a Topping. Very nice flame pattern!
Here is a rapid-fire of various FireGlass fireplaces.
This is in Los Angeles and is this what your fireplace looks like? Most people think their fireplace isn't too bad. Really now! We just help in adding color.
Below is in Orange County. Add a little Red Topping. add a little Orange Topping, over 1/2" Starfire Base Glass and you're done.
Granite backed fireplace below. With one of our manifolds for more fire! Same fireplace with pan.
Bronze Base Glass with Bronze Reflective Base Glass over and topped with Starfire Base Glass.
Below. Clear Base Glass with Evergreen Reflective Base Glass fire glass on top
Step 1 - clean and paint.
Step 2 - Pour the 1/2" Clear Base Glass and 1/4" Azurlite Base Glass FireGlass and light.

This fireplace is using Clear Base Glass with Blue Green Base Glass fire on top.

The beautiful fireplace design comes from Claremont, California. It was fitted with a triple burner for more flame to come through the fire glass.

Projects of Interest
Tradewinds Fire Pit (click here)
Dallas Fire & Water Fountain (click here)
Dave Sutton Table (click here)
Fire Tables and Portable Fire Pits (click here)
Dominick's Fire & Water Fountain (click here)
Here Is A List Of Our Many Unique Products
|
High Quality Base FireGlass - Check it Out! |

|
FireGlass Decorative Toppings - Check it Out!
|
 |
Toppings Colorful Granular Fire Crystals and Fire Stones - Check it Out |
 |
Fireplace Burners Double, triple, H pattern, Double H pattern, Triple H pattern to name a few. Check it out! |
 |
Propane Pans In brushed aluminum, stainless steel, brass, copper, steel or any other metal finish you would desire! Check it Out
|
 |
Fireplace FireBalls Available in matte and shiny porcelain finish- Check it Out! |
 |
Fireplace Clay Stones and Concrete shapes and Balls. Available in various sizes and colors. Check it Out! |
 |
Logos in Fire Glass Available in any size or design! Choose your colors from our large selection of FireGlass and we build custom frames that match your logo. Put this in your fireplace or fire pit Check it Out!
|
 |
Custom Fireplace Surround Frames Our surrounds can be made from Aluminum or Stainless Steel, or whatever material you like. There are often small imperfections, but that's because they are hand made; not machine manufactured. Check it Out!
|
 |
Vortex Fires For both indoor and outdoor. With optional remote control, propane conversion, vinyl or marine vinyl covers, and pedestals. Size and cost range from:
18" x 18" by 36" high, with windshield. Clear glass = $1200 Reflective = $1600
18 x 18 by 48" high, with windshield. Clear glass = $1200 Reflective = $1600 Without Windshields 12" x 12" by 36" high Clear glass = $800 Reflective = $1200
12" x 12" by 48" high Clear glass = $800 Reflective = $1200
Check it Out! |
 |
VortexED 55 An alcohol based Vortex specifically designed for indoor use. We offer several creative options using clear glass with various metal bases and stands. Sizes range from
4 x 4 x 12 high at $80/ $105
4 x 4 x 14 high at $90/ $115
5 x 5 by 14 high at $100/ $125
6 x 6 by 18 high at $140/ $180
8 x 8 by 24 high at $240/ $280
12 x 12 by 30 high at $280/ $320
Extra charges apply for stainless steel, copper, brass, etc
Check it Out! |
 |
Portable Fire Glass Fire Pits Available in both propane and natural gas. These are made from perforated aluminum or whatever material you'd like. We can customize these to suit any size, shape or material, even with wheels! Check it Out!
|
 |
Black Magic, Blue Flames Our black magic sand will give your fire pit or fireplace that WOW factor you always wanted. Check it Out!
|
 |
Stainless Steel Bowls Our bowls can be made from various materials and designed to your custom needs. We often use these bowls for fire & water features with colored fiber optics lights. Check it Out!
|
 |
Custom Fire Bowls No job is too big or too small. We can provide the right type of custom burners and FireGlass to fulfill the toughest commercial job expectations. Check it Out!
|
 |
FireGlass for Custom Fireplaces We've helped thousands of people with their custom fireplaces. From homes in Beverly Hills to boutique Hotels. There's no project we fear. Check it Out!
|
 |
Fire Tables with Fire Glass Want beauty & function together? Custom fire tables provide warmth and elegance. Commercial or residential, no problem. Check it Out! |
 |
Indoor Fires We've worked on some amazing indoor fire tables over the years. Propane or Natural gas jobs. Check it Out! |
 |
Outdoor Fire Pits Our FireGlass can make any fire pit look better! Check it Out!
|
|
Custom Water and Fire Features We fear no custom jobs. From propane or natural gas flames, water features combined with fiber optic color lights. Just ask, chances are we can make your dreams come true! Check it Out!
|