We are "The Innovators, not the Imitators"tm We created the Fireplace glass industry as it is known today.

(909) 989-6129

Burning Today...For A Greener Tomorrow!


The fireplace below was installed with one of our custom propane pan burner. Step 1, paint it!

pat 1 pat 2

Step 2, lay a bed of crushed lava and Install the propane pan burner.
pat 3 pat 4

Fill in and all around the pan with crushed lava rock.  On the left side you can see the gas connection which will soon be covered as well. This  was fitted with a remote control.  The glass installed was Clear Base Glass, very nice!

pat 5 pat 6

Now that you're finished you're ready for FIRE!
pat 7 pat 8

pat 9

The fireplace below was installed in Palm Springs, California.

ps pirates 1 ps pirates 2

Below you can see the flame hitting the back wall creating a soot mark, not very nice looking. The customer didn't want the fireplace painted, why?  There's that soot mark! If you do paint make sure the work is not spotty! That looks nasty as well.

ps pirates 3 ps pirates 4

Above you see the typical hard piped burner installed which is fine for logs or lava. But this does not really work well for glass.  Below you see the double burner installed with an 18" flex line.

ps pirates 5 ps pirates 6

Test the burner and some lava rock, with some Starfire Base Glass.

ps pirates 7 ps pirates 8

Now we added 1 lb of our Topper, Pirates Treasure!
ps pirates 10 ps pirates 11

The fireplace below is in Palm Springs, California and is a self install.  Clean and paint the walls in the color of your choice, we offer 25 colors!

ps azurlite 1 ps azurlite 2

Screw on the flex line adapter.  Attach the flex line and burner with the flex line under the burner.

ps azurlite 3 ps azurlite 4

Test the burner to insure the flames are not hitting the back wall. Pour on the glass, with or with out filler (sand or crushed lava rock)

ps azurlite 5 ps azurlite 6

And you're done!

ps azurlite 7 ps azurlite 10

The fireplace below is a self install with a Hanover Red back ground, The glass that was used is a Clear Base Glass with Starfire Base Glass on top. The Red Topper and Orange Topper were applied. Jon and Liz Kleinman even labeled their pictures for us.

jon 2 jon 3
jon 4 jon 6

Then the Starfire Base Glass and Toppers were added.
jon 1

The fireplace below is a self install with out any filler. They used a Clear Base Glass with a 17 lb layer of Starfire Base Glass to cover the Clear Base Glass.

rick 1 rick 2
rick 3 rick 4

The fireplace below is in Santa Monica California. The fireplace is a Malm Fireplace which can be found at: Ask for Keith or ask for Glen.  We used an 18" double stainless steel burner and a bed of Starfire Base Glass topped with a few pounds of our Ice Ice Ice Topper.  This is a very simple self installation as you will see.

1 2
3 4
5 6


The fire pit below was built by Mark Showalterin Washington state.  He used: Gray Base Glass and Gray Reflective Base Glass,  Gray Pyrite Base Glass,  Copper Ruby Red Topper, and Black Base Glass mixed in.This is the stone pot with the bottom up.

Mark Showalter 1 Mark Showalter 2
Mark Showalter 3 Mark Showalter 4

They drilled for the trimming valve to be installed.

Mark Showalter 5 Mark Showalter 6
Mark Showalter 7 Mark Showalter 8
Mark Showalter 9 Mark Showalter 10
Mark Showalter 13 Mark Showalter 15
Mark Showalter 16 Mark Showalter 17

A picture is worth a thousand words, and here you have it.

Mark Showalter 18 Mark Showalter 19

The fireplace below is a self install in Palm Springs at Tim Rockwood's. 


Below you can see the grate (noting great here) and the remote control. Too much stuff in the fireplace if you ask me.


Below all of the STUFF is removed, much better!  


Above and below it is now painted and the double 18" burner is installed with about 2" of crushed lava.


Now pour the glass, in this instance we used a 2" layer of Solex Base Glass


So we went from ugly to nice. Very clean look!SELF INSTALL FIREPLACE 16

Another Do It Yourself fireplace remodel.  First, the tile that was initially installed was wrong as it was not rated for fire.  So one way or another the tile would of come off!  For as soon as the fire was turned on the heat would of caused them to pop off!  So always do a little research before hand.

Christy's Fireplace 1 Christy's Fireplace 2

When redesigning a fireplace we suggest creating a card board mock-up.  A mock up can give the best preview of your project.

Christy's Fireplace 3 Christy's Fireplace 4

Below you can see the bottom, top and mantle as card board mock-ups.

Christy's Fireplace 5 Christy's Fireplace 6

Now the rip and tear process begins!  Below the custom installed the extra electrical for the components and the TV. The components will be installed on the right side out of view with a black glass door. This will be installed later.

Christy's Fireplace 7 Christy's Fireplace 8

Below the framing begins.

Christy's Fireplace 9 Christy's Fireplace 10

Below he now adds the Durock at the fireplace opening.

Christy's Fireplace 11 Christy's Fireplace 12
Christy's Fireplace 13 Christy's Fireplace 14

Below you can see the slate is being added as specified, never under-estimate Math in your projects - there critical to these type of projects!

Christy's Fireplace 15 Christy's Fireplace 16
Christy's Fireplace 17 Christy's Fireplace 18

Above and below the fireplace is 90% finished. The mantle needs to be installed as well as the door to conceal the remote control components. The inside of the fireplace will have 3 pieces of black galaxy granite installed.

Christy's Fireplace 19 Christy's Fireplace 20

Now for the glass installation. We started with a satin black paint on the back walls, until we install the granite.  Then we bulked up the base with 2" of white sand as this will save you a bunch of money! We used sand because we were pouring Starfire Base Glass in the fireplace. If we were to use a darker color of glass we would of used our crushed lava rock as a filler. When using sand, always make sure the burner is on top of the sand.  Test the burner/ location making sure the flames don't hit the walls.

Christy's Fireplace 21 Christy's Fireplace 22

Then pour the glass!

Christy's Fireplace 23 Christy's Fireplace 25

We added a few Pink Diamonds and then later added Ice Ice Ice Toppers and Clear Diamonds. These products because of the way they are made appear to be melting on the inside.

Christy's Fireplace 24 Christy's Fireplace 26

The sealer that was used was a stone enhancer, not just a regular cheap sealer. When using rock you always want to see the beauty of the stone you are using.

Christy's Fireplace 28

The next fireplace pictures are from Andy Peeke from New Jersey who installed his glass fireplace with his wife. 
Andy Peeke 10 Andy Peeke 9
Andy Peeke 8 Andy Peeke 1

Andy used a double "H" to give a wider flame pattern. He used a sand base below his H-Burner, making sure not to cover it.

Andy Peeke 2 Andy Peeke 3

Now 2" of Starfire Base Glass.  And you're done!

Andy Peeke 4 Andy Peeke 5
 Andy Peeke 6

The fireplace below belongs to Marcia and here is what we did to update her fireplace.  First here is what your fireplace may looks like now, dirty!

Marcia 1 Marcia 2

We reconfigure the pilot, burner, base plate and venting to get it to burn properly.  Nice flames, then we continue.

Marcia 3 Marcia 4

If you look below we are showing you proper pilot light placement.

Marcia 5 Marcia 6

Paint it and you're done! The glass that we used was a Starfire Base GlassBronze Rust Copper Base Glass and Bronze Reflective Base Glass on top.

Marcia 7 Marcia 8

If your fireplace does not work this easy or look this simple, then we didn't do it!  Let us help you make your fireplace work right and look good.

Marcia 9 Marcia 10

The next fireplace was installed by Ken Kenoyer. He constructed his own pan for his Direct Vent Fireplace conversion with our supervision. We will go through the steps to complete his installation. The glass that was used was Starfire Base Glass and topped with Red Topping and Red Topper. We will explain as we move forward.  Above is your fireplace now (if you like logs). Below is your burner system that came with your wonderful Direct Vent Fireplace and logs.

Royce Kenoyer 9 Royce Kenoyer 11

Below is a picture of the pilot light system.  Below we have removed the "stuff" and exposed the pilot and gas connection.

Royce Kenoyer 12 Royce Kenoyer 6

Royce built a pan to fit the fireplace.  Below he cut the pan out to accept the pilot light.

Royce Kenoyer 7

Royce Kenoyer 3

Connected the gas line. Tested the burner.

Royce Kenoyer 16 Royce Kenoyer 15

Pour the glass and you're done! If anyone has told you that you can't convert a direct vent fireplace then these pictures and project don't exist! Just because they don't know what or how to do it, doesn't mean it can't be done.  The glass face is back on and it looks much better. A very nice and simple Self Installation!

Royce Kenoyer 17 Royce Kenoyer 14

The fireplace below was a Self Installation by Julie and Ty Hergenrother. This is a typical Direct Vent conversion that we help hundreds if not thousands of customers convert from those nasty logs. The glass that was installed was a base of  Starfire Base Glass and topped with Bronze Base Glass and Gold Base Glass. These all start out nasty and we do what we can to change that, one fireplace at a time.

Julie-Hergenrother-1 Julie-Hergenrother-2
Julie-Hergenrother-3 Julie-Hergenrother-4

We even made the bottom face shield to make it look more uniform. This can also be done in any metal or design.  The fireplace below is a direct vent/ B vent fireplace which was installed in Dallas, Texas by Nadine Of Elegant Reflections. She started with a Starfire Base Glass and topped it with Clear Platinum Base Glass and added Purple Drops and Lilac Drops. We will start of with the before pictures, has anyone ever told you "Nice Logs"? I don't think so!

Julie-Hergenrother-5 Elegant Reflections 7
Elegant Reflections 6 Elegant Reflections 1
Elegant Reflections 2 Elegant Reflections 3

Nadine is very creative and always tries to add her personal touches.

Elegant Reflections 4 Elegant Reflections 5

Hi Ed,

I finally managed to finish the fireplace. We have decided to place a 2" piece of metal in front (which hasn't been done yet), though, to keep the glass off the ledge. We thought it would be deep enough, but that didn't quite work.

To enable me to keep the center area smooth, we had to place the burner on top of the wall pipe, which created a rather high burner placement. This ended up creating a bit of a problem because I had a steep slope to the hearth. This is why I need to add the metal strip in front--so the glass doesn't roll down and come out of the fireplace. We had decided to not have a glass door on it, although if we find something we really like, that could change.

judi 1 judi 2

 The pics might come in 2-3 e-mails, but I'll describe them here. The first few pics are duplicates of ones I already sent you.

1. Original fireplace, emptied out.

2-3. After painting with the dark blue from the chart you guys gave us. The wall was painted to match, although, I'm not sure I really like it. I'm trying to reserve judgement until I see it for awhile.

The damper handle is a brass duck head which wasn't even noticeable when it was all black.

4-5.New burner in place. This created more problems than expected due to the wall pipe being higher than most. We ended up using regular lava rock, since we couldn't find the smaller rocks. Then we added small pea gravel to fill in gaps around the lava rock. After the burner was finally level, we added the sand.

judi 3 judi 4

6. Testing the burner with sand added.

judi 5 judi 6

7. Clear Base Glass added.

8. Rest of colors were added--Starfire Base Glass, Azurlite Base Glass, Cranberry-Pink Topping, with a little Steel Blue Topper and a few Ice Cubes.

9-10. All finished and burning.

judi 7 judi 8

We're still working on the right side of this wall which has cabinets holding the TV and storage. Once the entire wall is finished, I'll send you one final pic of the entire wall. Not sure how soon that will happen, so don't wait for it, if you want to post these pics on your website.

I want to thank you for all your help. Your store was great to visit, so we could pick our glass out in person. Your staff was very helpful and we had a great time making our final color choices. I'll will definitely recommend you to others.

Here is another tip on How to correctly install a natural gas burner.
A picture is worth a thousand words, here are three thousand words!

Judi Weers  

Senior Instructor for Art Clay  

PMC Certified e mail any comments or questions to Judi

judi 9 judi 10

Go To Page 3

See Our Terms And Company Conditions!

Visit our E Store! "CLICK" HERE or below on the photo / Our E Store!

Ed Jaunzemis

Phone 909-989-6129        Fax 909-944-3811

9467 9th Street #D

Rancho Cucamonga, California 91730

We Make Fire Cool!

Moderustic® is proud to have been issued 4 U.S. Patent Numbers
and 2 Patents pending status!  5th one just awarded notice of allowance 10/23/2021
Covering our method of creating tumbled tempered glass for use in fireplaces and fire pits.
Patent Applications Published 2005, 2006, 2014 and 2017 (twice). Worlds most infringed PATENT in WORLD HISTORY!

Visit Our Original
Or Visit Our NEW

Propane Prop 65 Warnings


Our Glass is SAFE and See Why!

Safe Glass

We Make Fire Cool!

Moderustic® is proud to have been issued 4 U.S. Patent Numbers
and 2 Patents pending status!  5th one just awarded notice of allowance 10/23/2021
Covering our method of creating tumbled tempered glass for use in fireplaces and fire pits.
Patent Applications Published 2005, 2006, 2014 and 2017 (twice). Worlds most infringed PATENT in WORLD HISTORY!

909-989-6129  Fax: 909-944-3811 
or E-mail us at |  


Stop by and visit our Showroom in Rancho Cucamonga:(just north of the Ontario Airport
Moderustic Inc.
9467 Ninth Street Suite #D
Rancho Cucamonga, California 91730
Hours: Monday-Friday 9:00 to 6:00 Closed Saturday and Sunday, Saturday by appointment only.

If you're coming late, please call us and we will stay late.  We are 2 miles North of the Ontario Airport
Moderustic Fabrication University
Investment, Employee or Career Opportunities.

  • Prop 65 Warning:
  1. WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer, and Carbon Monoxide, Lead and Lead Compounds which are known to the state of Califronia to cause birth defects or other reproductive harm. For more information go to
  2. ADVERTENCIA: Este producto puede exponerlo a productos químicos como el plomo y los compuestos de plomo, sabidos por el estado de California como causa de cáncer, y el monóxido de carbono, el plomo y los compuestos de plomo, sabidos por el estado de Califronia como causa de defectos de nacimiento u otros daños reproductivos. Para obtener más información

US patent numbers US9700987B1 and US9808905B2

, Patents and patents pending

Visit www.USPTO.GOV for details on Patent infringement

or E-mail us at | 

All of the pictures and content are copyright protected on this website: U.S. Copyright Registration No is: VA 1-650-624
Entitled: "Moderustic 1107" 
Effective registration date is February 1, 2008.
Has anyone ever told you "Nice Logs" ? Nooo, I don't think so.
CSLB# C-17 693887

Violators will be prosecuted.

Note* When calling for any technical support we ABSOLUTELY (maybe)
require Digital photos from a camera not your phone (if that is all you have, then that's fine).

909-989-6129  Fax: 909-944-3811 
or E-mail us at |  


Click HERE or on the Picture below to see our MOVIES!
Let's Go To The Movies
Click HERE or on the Picture above to see our MOVIES!


Check out the Car Garden, A fun car page by Ed

Car Garden

We now have "several" Patents and a Patent Pending Status. "We were the first to file" (yes we were), is why we have The Patents for FireGlass.

For any competitors out there, Second place is first loser. Sorry.

See our page for Investors!


Powered by PD/GO Digital Marketing Copyright © 2024 Eco Fire . All rights reserved.