The fire pit below was built and designed by Brett Parks in Indiana. Brett came to us to help hm create his water fire feature for his back yard and be able to winterize it during their frigid winters. The glass he used was a:
We then built a custom shape stainless steel burner to fit his idea. We will explain as we go.
Here is his original concept drawing:
Below is his layout with pavers, electrical and gas line coming up.
6" deep water tank.
Stack a few more pavers.
Let's test it!
A custom size and configuration ring was fabricated.
Now your done!
The remote box has an electronic (battery) starter and a variable fuel valve. Propane must be mixed with air (air mixer valve/ venturi) to insure a clean bur without soot! If you burn straight propane you will experience black smoke/ soot and this is not good. We have worked on the development for several months now on these burners and they are now ready for you.
The picture on the lower left is of a possibility for the new burners. You can mount these into any table. With this in mind when we designed these we wanted the customer to be able to build or design any base, table or fire pit to install a propane burner.
The picture on the right is of the bottom side of the control box.
The left picture is of the control box with the air mixer. The picture on the right is of the ring and base plate which prevents the propane from sinking.
Below on the right are the thermocouple and electronic starter. The thermocouple is the safety switch which if the fire is blown out and leaving the thermocouple cold will shut your system off for safety reasons.
Here are the first pictures of our propane pan burners and more details will follow.
These are our round ring burners with out the center hub and these can be made in any size in steel or stainless steel
low is a 36" aluminum pan burner for propane with a 3" outside lip. These can be made to fit any fire pit, fire table of fire fit for natural gas or propane. We can build anything! This pan has a thermocouple for safety and air mixer built in to eliminate soot.
The half round burners below were installed at the Marriott "Gas Lamp" San Diego, California in a 72" Fire pit. We will post pictures of the finished project when we get the pictures sent to us. These were 24" x 48" stainless steel half round burners.
The fire pit below shows our FPPK (fire pit propane kit) a 30" base with a double 24" stainless steel burner. You will notice the igniter and thermocouple (heat switch for safety). The base plate is to prevent propane from leaking into the fire pit below.
The burner below has a 300,000 btu controller, 36" triple ring mounted on a 48" aluminum base plate for a fire pit in San Diego. These can be adapted for natural gas or propane with up to a 96" lead pilot light and igniter.
The bowls below are a newer product which we can help you convert your table you have now or build a table around the the bowl we provide you. We can build these for natural gas or propane. Filled with crushed lava rock and ready for what ever you would like to cover it with. We can spin bowls in any size. These come with steel or stainless steel rings, double or single rings. The bowl are very economical and are available up to 24". Anything over 24"will be a custom size, but we can make any size.
These bowls were set up for propane and as you can see the thermocouple in the picture above.
24" 1/2 round triple stainless steel pipe 304 stainless steel pipe
The burner below is a propane manual valve with a pilot light. this burner is mounted on a 60" x 30" 1/2 round stainless steel plate which is not included as standard but an option.
The burner itself is a #304 stainless steel 1/2" pipe triple ring burner and can be used for propane or natural gas.
Here is a pan burner
Propane Burners air intakes:
When you are using propane you must have an air intake along with other safety devices.
We will be posting out new propane burners on line in the next few weeks as we find the time. Propane burners need a thermocouple and a safety pilot light kit for safety reasons.
The pictures above and below are just showing the air intake and safety valves and other pictures will follow soon.
We will be posting our ring burners in steel and stainless steel.
This is a 120" burner.
The fire pit below is a failed attempt of a propane conversion without our help in the beginning. You can't just burn propane! If you try this, this is what it will look like. You need to calibrate the amount of air to propane or it will back fire, burn black or explode! We recommend a thermocouple, air mixer/ venturi along with several other important factors. We won't tell you who tried this but we will tell you we did fix the issue and now the customer is very happy. We did use Azurlite Base Glass with Azurlite Reflective Base Glass.
This is one side of the two sided fireplace and we will post pictures when the glass is installed of both sides.
The fire pit below has a half round 4 piece stainless steel ring custom made to fit the shape of the fire pit.
This stainless steel burner was designed and built by one of our dealers, Todd Janssen in Orange County, California. If you dream it, we can build it! This was build for a custom shaped fire pit.
On this page we will be posting our new line of burners in different sizes and shapes. These will soon be available on the E Store as well.
The rings and shapes will be made in:
steel tubing,
stainless steel tubing,
steel pipe,
stainless steel pipe, #304 and #316 marine grade
rounds, with and with out centers,
singles, doubles, triples, quads and quints (5)
half rounds,
star burners, u burners, h burners and on and on. And if this is not enough we will custom build a burner to your specifications. Any and or all of these burners can and will be calibrated to burn propane or natural gas. (propane require special controls and calibration). Please note the difference in tubing and pipe, steel and stainless steel.
6" stainless steel with center hub in tubing.
This ring is also shown with 6" stainless steel ring burner with center hub made from 304 stainless steel pipe.
6" stainless steel pipe with center hub.
Also shown with an 8" stainless steel pipe with center hub.
8" stainless steel pipe with center hub.
Also shown with 8" steel pipe with center hub.
8" steel pipe with center hub.
Shown with 8" stainless steel pipe with no center.
8" stainless steel pipe with no center.
Also shown with 8" steel pipe with no center.
8" steel pipe with no center.
Shown with 10" stainless steel pipe with a center hub.
10" stainless steel pipe with center hub.
Shown with 10" steel with center hub.
10" steel pipe with center hub.
Shown with 10" stainless steel with no center hub.
10" stainless steel pipe with no center hub.
Shown with 10" steel pipe with no center hub.
10" steel pipe with no center hub.
Shown with 12" steel with no center hub.
12" steel pipe with no center hub.
Shown with 12" steel pipe with center hub.
12"' steel pipe with center hub.
Shown with 12" stainless steel with no center hub.
12" stainless steel pipe with no center hub.
Shown with 12" stainless steel pipe with center hub.
12" stainless steel pipe with center hub.
Shown with 12" double steel pipe with center hub.
12" single stainless steel tubing
12" double stainless steel tubing
12" double steel pipe with center hub.
Shown with 18" stainless steel pipe with center hub.
18" single stainless steel tubing
18" double stainless steel tubing
19" double steel tubing
19" double stainless steel tubing
22" double stainless steel tubing
18" single stainless steel pipe with center hub.
Shown with 18" double stainless steel pipe with center hub.
18" double stainless steel pipe
24" double stainless steel tube
24" triple stainless steel tube
24" 1/2 round double (24" x 12") stainless steel tube
24" 1/2 round (24" x 12") triple stainless steel pipe
30" double stainless steel tube
36" triple stainless steel tube
36" 1/2 round double (36" x 18") stainless steel #304 pipe
36" 1/2 round triple (36" x 18") stainless steel #304 pipe
48" 1/2 round double (48" x 24") stainless steel tube
48" 1/2 round (48" x 24") triple stainless steel #304 pipe
48" 1/2 round (48" x 24") quad stainless steel #304 pipe
24" 1/2 round double (24" x 12") stainless steel pipe
24" 1/2 round triple (24" x 12") stainless steel pipe
30" double stainless steel ring pipe
30" triple stainless steel ring pipe
30" 1/2 round double (30" x 15") stainless steel pipe
30" 1/2 round triple (30" x 15") stainless steel pipe
36" double stainless steel ring pipe
36" triple stainless steel pipe
36" 1/2 round double (3" x 18") stainless steel pipe
36" 1/2 round triple (36" x 18") stainless steel pipe
48" 1/2 round triple (48" x 24") stainless steel pipe
48" 1/2 round quad (48" x 24") stainless steel pipe
12" star steel crimped pipe
12" star steel flat welded end pipe.
12" star stainless steel crimped end pipe
12" star stainless steel flat welded end pipe
18" star steel flat welded end pipe
18" star steel crimped pipe.
18" star stainless steel crimped pipe
18" star stainless steel flat welded end pipe.
24" star steel crimped pipe
24" star steel flat welded end pipe
24" star stainless steel crimped pipe
24" star stainless steel flat welded end pipe.
30" star stainless steel crimped pipe
30" star stainless steel flat welded end pipe
30" star steel crimped pipe
30" star steel flat welded end pipe.
The custom fireplace below has a star burner and a very nice star
U Burners,
Pipe Burners,
Fire Ring Burners,
Stainless Steel and Steel,
Pan Burners,
Trays Burners,
Propane Burners,
We are going to be posting pictures and pricing of out new burner line and here is a list of the burners:
6" ring stainless with center hub 304 stainless steel pipe
6" ring stainless with center hub stainless steel tubing
8" ring stainless with center hub 304 stainless steel pipe
8" ring steel with center hub pipe
8" ring stainless without center hub (center-less) 304 stainless steel pipe
8" ring steel without center hub (centerless) pipe
10" ring stainless with center hub 304 stainless steel pipe
10" ring steel with center hub pipe
10" ring stainless without center hub (center-less) 304 stainless steel pipe
10" ring steel without center hub (center-less) pipe
12" single ring steel tubing
12" double ring steel tubing
12" single ring stainless steel tubing
12" double ring stainless steel tubing
18" single ring steel tubing
18" double ring steel tubing
18" single ring stainless steel tubing
18" double ring stainless steel tubing
19" single ring stainless steel tubing
19" double ring stainless steel tubing
22" single ring stainless steel tubing
22" double ring stainless steel tubing
24" single ring stainless steel tubing
24" double ring stainless steel tubing
Half Rounds
24" double stainless steel tubing
24" triple stainless steel tubing
24" double stainless steel pipe 304 stainless steel pipe
24" triple stainless steel pipe 304 stainless steel pipe
30" double ring steel tubing
30" double ring steel tubing
30" double ring steel tubing
30" double ring steel tubing
30" triple ring steel tubing
30" triple ring stainless steel tubing
36" double ring steel tubing
36" double ring stainless steel tubing
36" triple ring steel tubing
36" triple ring stainless steel tubing
36" double ring stainless steel 304 stainless steel pipe
36" triple ring stainless steel tubing 304 stainless steel pipe
Half Rounds
36" 1/2 round double ring stainless steel 304 stainless steel pipe
36" 1/2 round triple ring stainless steel 304 stainless steel pipe
48" double steel ring tubing
48" triple steel ring tubing
48" quad steel ring tubing
48" double stainless steel ring tubing
48" triple stainless steel ring tubing
48" quad stainless steel ring tubing
48" double stainless steel ring 304 stainless steel pipe
48" triple stainless steel ring 304 stainless steel pipe
48" quad stainless steel ring 304 stainless steel pipe
Half Rounds
48" 1/2 round triple ring stainless steel tubing
48" 1/2 round quad ring stainless steel tubing
48" 1/2 round triple ring stainless steel 304 stainless steel pipe
48" 1/2 round quad ring stainless steel 304 stainless steel pipe
Star Burners, 5 point in steel and stainless steel. Available in flat welded ends and crimped ends
12" steel crimped end
12" steel flat welded end
12" stainless steel crimped end
12" stainless steel flat welded end
18" steel crimped end
18" steel flat welded end
18" stainless steel crimped end
18" stainless steel flat welded end
24" steel crimped end
24" steel flat welded end
24" stainless steel crimped end
24" stainless steel flat welded end
These are our new propane burners for fire pits with use with PROPANE.
They are as follows:
18" pan with a 12" burner
24" pan with a 18" burner
30" pan with a 24" burner
